Description

Concord Industries
Flagpole Shafts are manufactured in the United States from seamless 6063-T6 aluminum with tensile strength not less than 30,000 psi and a yield point of 25,000 psi. Shafts in excess of 35’ exposed height are shipped as multiple piece units, then field-assembled with a self-aligning internal sleeve assembly. All Concord flagpoles are polished to a Deep Luster Finish creating an elegant soft sheen. Other architectural finishes, such as powder coat, clear anodized and Duranodic bronze are available. In the standard mounting application, Concord flagpoles are produced for the popular ground mount method. In this configuration, the overall shaft length includes the exposed height measurements plus 10% additional that fits into a ground sleeve assembly. Additional mounting methods including shoebase mounts are also available.
Sentry
Rope Based Internal Halyard System
Internal halyard flagpoles provide the best solution to the problem of vandalism. The Sentry flagpole uses an internal rope and a cam-cleat mechanism. Eight stainless steel bolts pass through a cast door frame assembly and the flagpole shaft, threading into thick dual inner reinforcement plates. This patented concept adds additional important strength to a flagpole when an access panel is used. A revolving truck is standard. Heavy duty revolving trucks and cast aluminum ball/truck assemblies, both with dual sealed bearing assemblies are also available.